C-COAT PREWASH

Pre-wash preparation with extremely effective cleaning power, with slightly alkaline pH. It dissolves contamination while damaging neither the paintwork nor the ceramic coating on it.

Directions of use:
- Shake the bottle well before use.
- Dissolve enough C-Coat Prewash according to the recommended dilution ratios below.
- Spray the mixture onto the dry surface from a distance of 25-35 cm.
- Wait for 2-3 minutes, then rinse the surface from bottom up. Use a microfiber cloth to wipe the car dry.

Recommended dilution ratio:
- 1:10 (heavy contamination)
- 1:5 (on extreme surfaces, e.g. wheels)
- 1:50 (general use)

473 ml | 4 L

C-COAT SHAMPOO

Highly concentrated foam shampoo

Specially recommended for cleaning before film installation, leaves no residue on the surface

pH neutral

Recommended dilution ratio: 1:1800

Directions of use:
- Shake the bottle well before use.
- Add C-Coat Shampoo to water in the ratio of 1:1800.
- Using a wash mitt and gentle pressure, clean the car from top down.
- Rinse the surface with water and wipe it dry with a microfiber cloth.

473 ml | 4 L

C-COAT CLAY BAR FINE | C-COAT CLAY BAR COARSE

Coarse and fine clay bars designed for deep cleaning of paintwork, effectively removing a wide range of contaminants settled within the surface structure that regular degreasing cannot eliminate.

When used with C-Coat Clay Water, they provide excellent slip, ensuring efficient, safe, and scratch-free work

C-COAT CLAY WATER

Suitable for

• C-COAT CLAY BAR

• C-COAT CLAY TOWEL

• C-COAT CLAY MITT

Suitable for clay bar, clay towel and clay mitt as well.

Provides a good slip, in order to keep the work fast, safe and scratch free.

Use with rubber gloves.

473 ml | 4 L

C-COAT CLAY TOWEL | C-COAT CLAY MITT

Cleaning clay reimagined

The efficiency of the clay bar combined with an even more comfortable and quick work

Way of use:
Working on the principle of the clay bars, the Clay Towel and Clay Mitt unite the efficiency of traditional clays and an even more comfortable and quick use. Eliminate stubborn dirt safely and gently, without damaging the paint. Gives a silky, smooth finish to the paintwork.

C-COAT SURFACE PREP

Efficient and alcohol-free.

Leaves a perfect, streak-free shine; also works great on glass.

An ideal degreaser for surface preparation before applying PPF and ceramic coatings.

Why is it an ideal choice for preparing surfaces also before applying ceramic coatings? When using alcoholic cleaning agents, there is a risk that the coating does not bind to the surface properly. C-COAT SURFACE PREP is the best solution for this: it does not contain alcohol while removes contamination efficiently.

473 ml | 4 L

C-COAT IRON

The C-Coat Fallout & Iron Remover is a pH neutral iron & fallout remover which dissolves and removes iron brake dust particles and fallout from paint, wheels, chrome etc.

- Easy to apply: spray it – wait – wash!

- Safe for all surfaces: paintwork, wheel, glass and chrome parts

- pH neutral, gel-like, sprayable liquid

- Extra strong formula: dissolves all iron contamination quickly Professional cleaning solution for workshops and car owners

Instructions for use:
Spray the wheel/surface uniformly. Leave for 2 to 3 minutes. Distribute it on the wheels and also on the edges of door frames if necessary in order to spread the compound everywhere. Rinse with high pressure washer. Wash the car with shampoo. Rinse again. Repeat the process if needed

750 ml | 5 L

C-COAT BUG OFF

Specially formulated to dissolve insect and other organic residues from car paints and automotive film products, such as car wrapping film, paint protection films or exterior window films. Use it before pre wash shampoo. Do not dilute, use full strength.

WARNING! The use of the product on hot surfaces or in direct sunshine is forbidden.

Instructions for use:

1. Spray on the surface before applying pre wash shampoo.
2. Leave on the surface for 5 minutes.
3. Use C-Coat Pre Wash and after another 5 minutes wash off.
4. In case contamination is harsher, the reaction time can be increased to 5/10 minutes.
5. If contamination still remains on the surface, repeat the process.

750 ml

C-COAT GLASS POLISH

Glass polishing compound that efficiently removes buildup, heavy oxidation, and dirt residues that adhere to glass and remain even after window cleaning.

Eliminates swirl marks and light scratches.

Provides a spotless, perfectly clean window with improved visibility, especially in rainy conditions.

Application:

Apply the compound to a hard or medium-hard felt pad. Polish the window using overlapping movements. When using a rotary polisher, avoid overheating the surface.

Do not use on hot surfaces or windows with stone chips.

300 ml

C-COAT FILM-ON

C-COAT DE-TACK

Accessories

C-COAT GLASS PAD

C-COAT GLASS BAR

C-COAT BRUSH

High-quality multifunctional car care brushes that can be used wet or dry. Ideal for the most sensitive areas, both for detailed exterior and interior cleaning. Comes in a set of 5 different sizes.

C-COAT WASH MITT

The indispensable washing glove, which can be easily slipped onto the hand for use. Its gentle material does not damage the paint, the foil, or the ceramic coating. It is easily cleaned after use and extremely durable.

C-COAT DRYING TOWEL

Extremely efficient absorbent cloth that quickly and streak-free dries your car. Easy to clean and extremely durable.

C-COAT GLASS TOWEL

Water-repellent cloth specially developed for car windows for streak-free shine. Safe to use, it does not scratch the surface. Easy to clean and extremely durable.

C-COAT TOWEL

Universal wipe with short bristles for interior and exterior cleaning, works especially well when removing coatings.
320 GSM | 40×40 cm | 20 pc/pack

C-COAT WIPER

Premium grade microfiber cloth (black/red) for buffing coatings and compounds

400 GSM

C-COAT GLASS PAD

C-COAT GLASS BAR