Discover our premium car care products, specifically designed for the home maintenance of vehicles with paint protection film. To purchase our car care products, please contact your nearest Skyfol workshop.

C-COAT PREWASH

Pre-wash preparation with extremely effective cleaning power, with slightly alkaline pH. It dissolves contamination while damaging neither the paintwork nor the ceramic coating on it.

Recommended dilution ratio:

- 1:10 (heavy contamination)
- 1:5 (on extreme surfaces, e.g. wheels)
- 1:50 (general use)

Directions of use:
- Shake the bottle well before use.
- Dissolve enough C-Coat Prewash according to the recommended dilution ratios below.
- Spray the mixture onto the dry surface from a distance of 25-35 cm.
- Wait for 2-3 minutes, then rinse the surface from bottom up. Use a microfiber cloth to wipe the car dry.

473 ml | 4 L

C-COAT JET WET COAT

Hydrophobic coating for cars that can be applied on the wet surface right after car wash.
Economic, extremely quick and easy to use. Forms a hydrophobic and glossy coating on the surface lasting for weeks, making the car washing extremely easy. Can be used as a standalone coating or on existing coatings and films as a topping for enhancing gloss, hydrophobicity and longevity.

Suitable on paint, glass, coating, paint protection film, and car wrap film

Instructions for use
Do not use the product on hot surfaces or in direct sunshine.

Dilution rate: foam cannon: 1:10; foaming by hand: 1:50. Apply evenly on cleaned, wet surface after car wash. Rinse immediately with water jet.

473 ml | 4 L

C-COAT IRON

The C-Coat Fallout & Iron Remover is a pH neutral iron & fallout remover which dissolves and removes iron brake dust particles and fallout from paint, wheels, chrome etc.

- Easy to apply: spray it – wait – wash!
- Safe for all surfaces: paintwork, wheel, glass and chrome parts
- pH neutral, gel-like, sprayable liquid
- Extra strong formula: dissolves all iron contamination quickly Professional cleaning solution for workshops and car owners

Instructions for use:
1. Spray the wheel/surface uniformly with the Iron&Fallout Remover.
2. Leave for 2 to 3 minutes.
3. Distribute it on the wheels and also on the edges of door frames if necessary in order to spread the compound everywhere
4. Rinse with high pressure washer
5. Wash the car with shampoo.
6. Rinse again.
7. Repeat the process if needed

750 ml | 5 L

C-COAT GRAPHENE SHAMPOO

Special shampoo for car care after film installation, enriched with graphene. Provides a very hydrophobic surface, avoiding the necessity of mechanical action during cleaning. Also contains a drying agent, which helps the surface to be dried more easily.

Recommended dilution ratio: 1:100

Directions of use:

- Rinse the car and dilute the C-Coat Graphene Shampoo in water, in the recommended ratio.

- Using a wash mitt and gentle pressure, apply the mixture to the car from top down.

- Rinse the car with water and wipe it dry with a microfiber cloth.

473 ml | 4 L

C-COAT APC – ALL PURPOSE CLEANER

Efficient, versatile cleaning agent for car care offering a wide range of uses, both on interior and exterior surfaces. Applicable on metal, plastic, dashboard elements, leather, rubber and even textile.

Instructions for use:

Dilution ratio: depending on the degree of contamination 1:10/1:50

- Shake well before use.
- Spray on the surface.
- To disperse, use C-Coat Brush. Thoroughly rub the surface several times, ensuring the compound covers every part (including gaps, inlays) to dissolve the contamination. For severe contamination, repeat brushing multiple times and apply additional pressure with the brush onto the surface. Finish by wiping off with a microfibre towel.

473 ml | 4 L

C-COAT BUG OFF

Specially formulated to dissolve insect and other organic residues from car paints and automotive film products, such as car wrapping film, paint protection films or exterior window films. Use it before pre wash shampoo. Do not dilute, use full strength.

WARNING! The use of the product on hot surfaces or in direct sunshine is forbidden.

Instructions for use:

1. Spray on the surface before applying pre wash shampoo.
2. Leave on the surface for 2 minutes.
3. Use C-Coat Pre Wash and after another 5 minutes wash off.
4. In case contamination is harsher, the reaction time can be increased to 5/10 minutes.
5. If contamination still remains on the surface, repeat the process.

750 ml

C-COAT CERAMIC SEALANT

Sprayable sealant that creates an extremely hydrophobic, smooth, and glossy surface. It enhances the performance of the PPF and existing ceramic coatings.

Instructions for use: Avoid using on hot surfaces or in direct sunlight.
Thoroughly clean the car. Remove all contaminants and any previous wax to ensure proper bonding of the sealant. Shake well before use.

Dry application: Spray onto a microfiber towel or directly onto the surface. Do not overspray (2 to 3 sprays per section). Apply to one panel at a time in straight lines. Immediately buff off the residue with a clean towel. Avoid direct sunlight for 2-3 hours after application. Do not expose the surface to chemicals or detergents for at least 24 hours, and limit water exposure.

Wet application: Dilute at a ratio of 1:20. After washing the car, spray the diluted solution onto the wet surface. Immediately rinse off with pressure.

473 ml | 4 L

Accessories

C-COAT BRUSH

High-quality multifunctional car care brushes that can be used wet or dry. Ideal for the most sensitive areas, both for detailed exterior and interior cleaning. Comes in a set of 5 different sizes.

C-COAT WASH MITT

The indispensable washing glove, which can be easily slipped onto the hand for use. Its gentle material does not damage the paint, the foil, or the ceramic coating. It is easily cleaned after use and extremely durable.

C-COAT WHEEL WOOLIES

Multifunctional wheel and rim cleaning brush with wool head, available in three different sizes to ensure thorough removal of all dirt.

C-COAT AREA DETAIL BRUSH

A brush recommended for efficient and quick cleaning of larger surfaces, featuring an ergonomic, rubberized handle, extra soft bristles, and a metal-free structure, making it safe for use on sensitive surfaces. It comes with a drying and storage stand.

C-COAT DRYING TOWEL

Extremely efficient absorbent cloth that quickly and streak-free dries your car. Easy to clean and extremely durable.

C-COAT GLASS TOWEL

Water-repellent cloth specially developed for car windows for streak-free shine. Safe to use, it does not scratch the surface. Easy to clean and extremely durable.

C-COAT TOWEL

Universal wipe with short bristles for interior and exterior cleaning, works especially well when removing coatings.
320 GSM | 40×40 cm | 20 pc/pack

C-COAT WIPER

Premium grade microfiber cloth (black/red) for buffing coatings and compounds. 400 GSM